Most people would agree that shopping for tires is not one of the most fun things to shop for. Basically, we would just like to find a set of tires that will fit our car and keep us from calling for road service. Nevertheless, there are a few things that you should be aware of before going tire shopping.
First of all, you should buy new tires. Saving a few dollars is not worth sacrificing traction and performance. Your safety should be your first priority, so don’t buy used tires.
Walking into a tire showroom can be an overwhelming experience with literally hundreds of tire brands available, in a wide range of styles, construction, composition and price. To make the selection process easier and more effective we've put together these great tips.
1. Make sure that you actually need new tires
Perform a quick visual inspection. If you see excessive tread wear, cracked sidewalls, or any discoloration or bulging, it's probably time for a new set. If your tires are more than 10 years old, consider replacing them even if they look OK -- rubber deteriorates with exposure to oxygen.
2. Make sure that your car is in good shape
Inspect your tires for signs of uneven wear, which might indicate alignment or suspension issues. Check for signs like more wear on the inside or outside of the tire vs. an even wear pattern across the entire width of the tread. If you put a new set of tires on a misaligned car, or one with bad shocks, you're throwing money away. The new tires will wear quickly and unevenly, and you'll need another set in a hurry.
Most tire centers will inspect your current set of tires, and give you an assessment of your car's condition before you buy. If you have a trusted mechanic, bring your car in for an inspection before heading out to the tire center -- an impartial opinion from an expert who isn't trying to sell you something is always desirable.
3. Check your owners manual and information placard
The manufacturer of your car has made a recommendation about the size and type of tires which work best with your vehicle, that information is found in the owner's manual and on the information placard. The information placard on your vehicle is required by law, and is permanently attached to your door edge, door post, glove compartment door or inside your trunk lid. It may have been painted over on some older cars, but it's there. If you don't have an owners manual, most manufacturers will sell you a replacement at a reasonable cost -- ask your dealer, or search on the manufacturer's website.
4. Decipher the tire code
Perhaps the most confusing part of tire buying is figuring out what those numbers on the sidewall of the tire mean. They are part of a simple standardized code that is required by federal law in order to describe tires, and to identify them in case of a recall. You can read more in the National Highway Traffic Safety Administration's online "Tire Safety" brochure, but here's a quick primer:
Example Tire Sidewall Markings: P215/65R 15 95H M+S
- First up is a letter or letters, indicating the tire's purpose: "P" for passenger cars or "LT" for light trucks are the most likely letters you'll see.
- Next is a three-digit number. This is the tire's width (in millimeters) from sidewall edge to sidewall edge.
- Then, a two-digit number which is the tire's aspect ratio, or the ratio of height to width. The smaller the number, the shorter the sidewall.
- Next, a letter, probably "R," which indicates radial construction. Almost every tire you encounter will be a radial nowadays, unless you're buying tires for a classic car.
- Then, another two-digit number, which is the diameter of the wheel that the tire is intended to fit.
- Next, an optional two- or three-digit number. This is the tire's load index number, and its inclusion is not required by law. The load index number corresponds with the tire's load-carrying capacity. Discount Tire has posted a handy chart with the load index numbers and loads. Simply put, don't install a tire with a lower load index number than your manufacturer recommends.
- Next, a letter. This is the tire's speed rating. Follow your manufacturer's recommendation. You should only need to upgrade to a higher speed rating if you have modified your vehicle for track use, or if you are heading to Germany to drive on the Autobahn.
- Next, some more letters, usually "M+S" or "M/S." This stands for mud and snow, and applies to most radial tires sold in America.
There are more numbers and letters, most of which you don't really need to worry about unless your tires are subject to a recall. They refer to the tire's place and date of manufacture, the maximum inflation pressure, maximum load rating, composition, materials, tread wear, traction and temperature grades. Diving deeply into these ratings will yield a trove of information - most of which differs from manufacturer to manufacturer. Unless you are obsessive about your tires, you will probably be OK trusting in your tire guy's interpretation of the small print.
A good tire center will be able to talk you through these codes, and will know which tires are a good fit for your vehicle. You will have to choose between summer, all-season or winter tires, between extended tread life and better handling. Be sure to ask a lot of questions, get answers, and have your tire guy point out the features on the tires and the code that indicates the feature on the sidewall.
5. Consider the wheels
One of the most popular customization options on vehicles these days is a new set of rims. If your current wheels are worn or damaged, you might want to consider buying a new set when you replace your tires. There's more than appearance to consider when you buy wheels, however. Try to match size as closely as possible to the manufacturer's originals. Even though bigger wheels might look great on your car, there's some complicated math to making sure that the tires and wheels match the car.
The bigger the wheel, the lower the aspect ratio tire you'll be able to use. In order to make the car handle and turn properly, the outside diameter of the tire has to remain the same as the original tires as the wheel gets bigger -- which means shorter sidewalls. The sidewall is very important to handling, and it's also very important to comfort and noise. The shorter the sidewall, the less it will be able to flex when the car turns -- great for sporty handing -- and the less it will be able to absorb bumps and pavement irregularities. So a bigger wheel might lead to a harsher ride, and a squirrelly car. Additionally, the fact that custom wheels are often heavier than stock ones means they can negatively impact the suspension or fuel mileage.
That said, you still might want to put bigger wheels on your ride. Perform some serious research before you make that decision, and be careful not to sacrifice too much handling and safety for appearance.
6. Buy a full, matching set
Though you may be tempted to cut corners, and just replace the tire/s that are most worn, modern suspension technology is designed to work best with a matching set of tires. By replacing all four at once, you'll be able to maintain your tires better (more on that later), evaluate and repair suspension problems before they become major, and achieve the highest degree of safety and predictable handling.
7. Check on your spare
This is a great time to have your spare tire inspected, and replaced if necessary. If your car uses a full-size spare and you're replacing your tires with the same make, model and size, have your tire guy save the best used tire for a spare.
Tidak ada komentar:
Posting Komentar